Qubino Z-Wave Plus Universal Relay with Dry Contact Switch

Description

NOTE: This module requires a NEUTRAL wire if powered by 120 VAC. This is for use with DRY CONTACT circuits only
SPECIFICATIONS:
• Model Number: ZMNHND3
• Z-Wave Signal Frequency: 908.42 MHz
• Power: 120 VAC / 24 VDC
• Maximum Load for 110VAC: 2300 W / 10A
• Maximum Load for 24VDC: 240 W / 10A
• Power Consumption: 0.4 W
• Z-Wave Range: Up to 130 feet line of sight
• Operating Temperature: 14-104° F
• Installation and Use: Indoor only
• Dimensions: 1.6″ x 1.4″ x 0.6″
• Weight: 1 oz
COMPATIBLE HUBS:
Do NOT buy if your controller is not listed below. Contact Seller first.
• Domoticz
• Fibaro Home Center Lite
• Home Assistant
• HomeSeer
• Samsung SmartThings Hub with custom device handler – Contact Seller for Instructions
• VeraEdge
• VeraPlus
• VeraSecure

WHAT DOES IT DO? Install it behind your push-button garage opener switch, or at the low-voltage installation for your fireplace, or any dry contact circuit to get on/off Z-Wave control and status updates to your smart home hub.
WHAT ELSE DO I NEED? Check for NEUTRAL wire in the switch box (VERY IMPORTANT) if connection to 120VAC. If powering the relay by 24 VDC, you’ll need a separate power supply. You’ll need a compatible Z-Wave hub to use this device (scroll down for details), like SmartThings, Vera, or Home Center Lite. Does NOT work with Wink or alarm panels. Alexa is NOT a Z-Wave hub.
DIVERSE INSTALLATION: It’s so small, it will easily fit in any location and can be paired with a momentary or on/off wall switch for convenient local control. The relay adds to your system through auto-inclusion making the set-up quick and easy!
EXTRA FEATURES: Advanced configuration is available for expert users with open Z-Wave systems (parameter setting input required). THIS RELAY IS NOT SUPPORTED BY WINK, PIPER, OR ALARM PANELS (ADT Pulse, Vivint, Honeywell, Simon XT, and others).
IS THERE TECH SUPPORT? Yes! You can always contact the seller or manufacturer for help with wiring or programming your Qubino relay. You’ll get additional instructions and step-by-step directions for any installation.