ZOOZ Z-Wave Plus Toggle On Off Wall Switch ZEN23 (White) VER. 3.0

Description

NOTE: Do NOT connect this switch to ceiling fans, motors, or home appliances
NEUTRAL WIRE REQUIRED
SPECIFICATIONS:
• Model Number: ZEN23 VER. 3.0
• Z-Wave Signal Frequency: 908.42 MHz
• Power: 120 VAC, 60 Hz
• Minimum Load: 15W for LED and CFL bulbs
• Maximum Loads: 960W Incandescent, 1800W (15A) Resistive
• Z-Wave Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module
• Operating Temperature: 32-104° F (0-40° C)
• Installation and Use: Indoor only

Will it work with Alexa / Google Home?
Amazon Echo and Google Home are not Z-Wave controllers so you will need a compatible Z-Wave hub to control this switch with your smart speaker.
Alexa- and Google Home-compatible Z-Wave hubs include:

• Fibaro Home Center Lite
• Hubitat
• SmartThings
• VeraPlus
• Wink

FAST WIRELESS AND LOCAL CONTROL: Manual or remote on/off control from your mobile device or computer (when included to a Z-Wave gateway controller – sold separately. Alexa and Google Home are NOT Z-Wave hubs). Reports status instantly.
DIRECT 3-WAY SOLUTION: No add-on switch needed! Works with mechanical 3-way switches as long as NEUTRAL is present.
VERSION 3.0: More space for wall plate screws added (use short screws included in the box). Advanced settings like built-in timer (if you hub supports advanced setting input). Remembers and restores on/off status after power failure.
WORKS WITH YOUR HUB! Based on the universal binary switch command class – supported by most Z-Wave controllers (does NOT work directly with Alexa / Google Home). Z-Wave Plus certified > better range and communication speed.
CHECK YOUR WIRING FIRST: Neutral wire is required to complete installation!