Zooz Z-Wave Plus Wall Dimmer Switch ZEN22 (White) VER. 3.0

Description

NOTE: Check Wattage first: DON’T exceed 300-500 W for incandescent and 150 W for LED’s. Do NOT connect this dimmer to chandeliers, ceiling fans, motors, or home appliances
NEUTRAL WIRE REQUIRED
SPECIFICATIONS:
• Model Number: ZEN22 VER. 3.0
• Z-Wave Signal Frequency: 908.42 MHz
• Power: 120 VAC, 60 Hz
• Maximum Loads: 500 W Incandescent with all heat sink tabs on (400 W with one side off, 300 W with both sides off), 150 W LED’s
• Z-Wave Range: Up to 100 feet line of sight between the Z-Wave hub and the closest Z-Wave repeater
• Operating Temperature: 32-104° F (0-40° C)
• Installation and Use: Indoor only

Will it work with Alexa / Google Home?
Amazon Echo and Google Home are not Z-Wave controllers so you will need a compatible Z-Wave hub to control this switch with your smart speaker.
Alexa- and Google Home-compatible Z-Wave hubs include:

• Fibaro Home Center Lite
• Hubitat
• SmartThings
• VeraPlus
• Wink

SMART DIMMING: Control your lights and adjust brightness remotely through Z-Wave. Works with good quality LED’s (120 VAC only, no 0-10V control) and incandescent bulbs! Hub required (sold separately), scroll down for compatibility. Voice control only available with Alexa-compatible Z-Wave hub (will NOT work directly with Alexa / Google Home).
DIRECT 3-WAY SOLUTION: No add-on switch needed! Use it with regular on/off switches (NO dimmers) in your 3-way set-up. Connection to power and NEUTRAL required (check your boxes before buying).
RELIABLE AND DURABLE: Reports status instantly. Remembers and restores on/off status after power failure. Covered under 1 year warranty and lifetime tech support. UL listed.
BONUS FEATURES: Double tap to full brightness (single tap to last brightness level). Z-Wave Plus signal repeater, adjustable LED indicator (change mode straight from the switch!).
COMPATIBLE: Officially certified to work with SmartThings. This dimmer will be recognized by any Z-Wave hub that supports multilevel devices (other dimmers), including Wink, Vera, Home Assistant, HomeSeer, Fibaro Home Center Lite, ADT Pulse, Vivint, and others (advanced settings may not be available).